October 20 - Jason Kang will demonstrate offset turning.

November 17 - Dewayne Colwell will demonstrate making Christmas ornaments.

December  15 - Christmas party, gift exchange, and Show and Tell.

Monthly club meeting - August 18,
Tom Hight demonstrated making flowers.

__
 

Monthly club meeting - July 21,
Dewayne Colwell demonstrated making a lidded container.

__
 

Monthly club meeting - June 16,
Show and Tell

__
 

Monthly club meeting - May 19,
The class practiced making a bowl.

__
 

Monthly club meeting - April 21,
Dewayne Colwell demonstrated making a bowl.

__
 

Monthly club meeting - March 17,
Show and Tell

__
 

Monthly club meeting - February 17,
Gerry Augustin demonstrated making a Trivet.

__
 

Monthly club meeting - December 16,
Christmas Party, Gift Exchange, and Show and Tell

__
 

Monthly club meeting - October 21, 2024
Jason Kang demonstrated making Christmas ornaments.

__
 

Monthly club meeting - September 16, 2024
Show and Tell

__
 

Monthly club meeting - August 19, 2024
Lathe maintenance and building top blanks.

____
 

Monthly club meeting - July 15, 2024
Tom Hight demonstrated a funnel preventer.

____
 

Monthly club meeting - June 17, 2024
Show and Tell

____
 

Monthly club meeting - May 20, 2024
Dewayne Colwell demonstrated making a baby rattle.

____
 

Monthly club meeting - March 18, 2024
Show and Tell

____
 

Monthly club meeting - February 19, 2024
Jason Kang demonstrated making an offset lid for a container

_________
 

Monthly club meeting - January 15, 2024
Meeting cancelled due to bad weather

_________
 

Monthly club meeting - December 18, 2023
Annual Christmas party and Show and Tell.

_________
 

Monthly club meeting - November 20, 2023
Jason Kang demonstrated making some Christmas ornaments.

_________
 

Monthly club meeting - October 16, 2023
Dewayne Colwell demonstrated making a cowboy hat.

_________
 

Monthly club meeting - September 18, 2023
Show and Tell

_________

Monthly club meeting - August 21, 2023
Work day at the Hoover Bldg. and building top blanks.

_________

Monthly club meeting - July 17, 2023
Show and Tell

_________

Monthly club meeting - June 19, 2023
Jason Kang demonstrated how to make a 3D-illusion bowl.

_________

Monthly club meeting - May 15, 2023
Gerry Augustine demonstrated some offset turning.

______________

Monthly club meeting - April 17, 2023
Wayne Furr presented a slide show on tree and wood identification.

______________

Monthly club meeting - March 20, 2023
Show and Tell.

______________

Monthly club meeting - February 20, 2023
Charles Waggoner demonstrated several products he manufactures.

______________

Monthly club meeting - January 16, 2023
Dewayne Colwell demonstrated working with pre-turned staves.

______________

Monthly club meeting - December 19, 2022
Annual Christmas party and Show and Tell.

______________

Monthly club meeting - November 21, 2022
Richard Perry and Dewayne Colwell discussed - demonstrated
threads, flutes, beads, knurling, burning lines, captive rings, dyeing epoxy.
______________

Monthly club meeting - October 17, 2022
Dewayne Colwell demonstrated sharpening lathe tools.
______________
 

Monthly club meeting - September 19, 2022
Show and Tell

______________
 

Monthly club meeting - August 15, 2022
Lathe cleaning and top blank assembly

______________
 

Monthly club meeting - July 18, 2022
Dewayne Colwell and Cooper Gilliland demonstrated turning and burning a bird

______________
 

Monthly club meeting - June 20, 2022
Show and Tell

______________
 

Monthly club meeting - May 16, 2022
Gerry Augustin demonstrated off-center turning.

______________
 

Monthly club meeting - April 18, 2022
Tom Hight demonstrated making a bird mouth bowl.

______________
 

Monthly club meeting - March 21, 2022
Show and Tell

______________
 

Monthly club meeting - February 21, 2022
Dewayne Colwell demonstrated making finials and ornaments.

______________
 

Monthly club meeting - January 17, 2022
Shea Poage demonstrated turning a three-sided box.

______________
 

Monthly club meeting - December 20, 2021
Annual Christmas party and Show and Tell.

______________
 

Monthly club meeting - November 15, 2021
Tom Hight demonstrated making bottle stoppers.

______________
 

Monthly club meeting - October 12, 2021
Dewayne Colwell demonstrated closed-form bowl turning.

______________
 

 

______________
 

Monthly club meeting - August 16, 2021
Tom Hight demonstrated making flowers on the lathe.

______________
 

Monthly club meeting - July 19, 2021
Richard M. Perry demonstrated adding flutes to your projects.

______________
 

Monthly club meeting - June 21, 2021
Show and Tell

______________
 

Monthly club meeting - August 17, 2020
Sue Myers-Dyer demonstrated epoxy resin casting.

______________
 

Monthly club meeting - June 15, 2020
Show and Tell

______________
 

Monthly club meeting - March 16, 2020
Show and Tell

______________
 

Monthly club meeting - February 17, 2020
Tom Hight demonstrated making a vase for wooden flowers.

______________
 

Monthly club meeting - January 20, 2020
Richard Perry demonstrated making threads in wood.

______________
 

Monthly club meeting - December 16, 2019.
The club held its Christmas party, Show and Tell, and gift exchange.

______________
 

Monthly club meeting - November 18, 2019.
Dewayne Colwell demonstrated making Christmas ornaments.

______________
 

Monthly club meeting - October 21, 2019.
Dewayne Colwell demonstrated sharpening lathe turning tools.

______________
 

Monthly club meeting - September 16, 2019.
Show and Tell

______________
 

Monthly club meeting - August 19, 2019.
Dewayne Colwell demonstrated making an offset lattice top box.

______________
 

Monthly club meeting - July 15, 2019.
Don Mantooth demonstrated off-center turning.

______________
 

Monthly club meeting - June 17, 2019.
Show and Tell

______________
 

Monthly club meeting - May 20, 2019.
The meeting was cancelled due to severe weather.

______________
 

Monthly club meeting - April 15, 2019.
Dewayne Colwell demonstrated coloring wood.

______________
 

Monthly club meeting - March, 18, 2019.
Show and Tell

_______________
 

Monthly club meeting - February 18, 2019.
Richard Perry demonstrated making rings for your finger.

_______________
 

Monthly club meeting - January 21, 2019.
Dewayne Colwell demonstrated texturing.

_______________
 

Monthly club meeting - December 17, 2018.
The club held its combined Christmas party and Show and Tell

_______________
 

Monthly club meeting - November 19, 2018.
Tom Hight demonstrated pen making from start to finish.

_______________
 

Monthly club meeting - October 15, 2018.
Don Rippetow demonstrated hollowing with hand made tools.

_______________
 

Monthly club meeting - September 18, 2018.
Show and Tell

_______________
 

Monthly club meeting - August 20, 2018.
Don Mantooth demonstrated making finials.

_______________
 

Monthly club meeting - July 16, 2018.
Ron Eades discussed how to make Celtic Knots on pen projects.

_______________
 

Monthly club meeting - June 18, 2018.
Show and Tell

_______________

Monthly club meeting - May 21, 2018.
Dewayne Colwell demonstrated how to make a tippe top and a string top.
Tom Hight demonstrated how to make flowers from dowel rods.

____________________________
 

Monthly club meeting - April 16, 2018.
Darrel Cookman demonstrated making a five-sided bowl.

____________________________
 

Monthly club meeting - March 19, 2018
Show and Tell

____________________________
 

Monthly club meeting - February 19, 2018.
Don Mantooth demonstrated making natural edge goblets.

____________________________
 

Monthly club meeting - January 15, 2018.
Mike Hunter demonstrated making a calabash using some of the
carbide tipped tools his company makes ( www.huntertoolsystems.com )

____________________________
 

Monthly club meeting - December 18, 2017.
Combined Christmas party, Show and Tell, and gift exchange.

____________________________
 

Monthly club meeting - November 20, 2017.
David Keller demonstrated making a bell shaped Christmas ornament.

____________________________
 

Monthly club meeting - October 16, 2017.
Show and Tell

____________________________
 

Monthly club meeting - September, 18, 2017.
Tom Hight demonstrated making small flowers on the lathe.
Click here for detailed notes of his presentation.

____________________________
 

Monthly club meeting - August 21, 2017.
Ron Clinton demonstrated adding color to your turning.

____________________________
 

Monthly club meeting - July 17, 2017.
Show and Tell

____________________________

Monthly club meeting - June 19, 2017.
Dewayne Colwell demonstrated turning a three-cornered bowl - box.

___________________________

Mothly club meeting - May 15, 2017.
David Swanson gave a demonstration on ornamental turning with cut
architectural features.  Click here for detailed notes and pictures of his presentation.
Due to the length and large size of this file, load times will be much longer than normal.

____________________________

Monthly club meeting - April 17, 2017.
Show and Tell

_____________________________
 

Monthly club meeting - March 20, 2017.
Dewayne Colwell, Ralph Sawatzky, and Tom Hight
demonstrated how to sharpen and use the most common lathe tools.

____________________________

Monthly club meeting - February 20, 2017.
Dewayne Colwell demonstrated turning lidded boxes.

____________________________
 

Monthly club meeting - January 16, 2017.
Dewayne Colwell and Ralph Sawatzky demonstrated turning tops and stick pens. 
Then members took their turns at the lathes to turn them.

____________________________
 

Monthly club meeting - December 19, 2016.
Combined Christmas party, Show and Tell, and gift exchange.

____________________________
 

Monthly club meeting - November 21, 2016.
Ralph Sawatzky discussed finishing techniques and gave a demonstration.

____________________________
 

Monthly club meeting - October 17, 2016.
Show and Tell

____________________________
 

Farm Days - October 15, 2016
Photo-Gallery

_________________

Monthly club meeting - September 19, 2016
Tom Hight demonstrated some pen making and finishing techniques.

_________________

Monthly club meeting - August 15, 2016
David Keller demonstrated How to turn a pepper-mill.

_________________

Monthly club meeting - July 18, 2016.
Show and Tell

Charles Waggoner gave a demonstration on fractal wood burning with high voltage equipment.
__________________________

Monthly club meeting - June 20, 2016.

The following officers were elected for 2016-2017:
President - Tom Hight
President Elect - Dewayne Colwell
Treasurer - Ralph Sawatzky
Secretary - Richard M. Perry

Dave Williams made a presentation on Vessels of Illusion where the lids for hollowed vessels
are inside the vessel, but are larger than the opening of the vessel.  Jim Clow demonstrated
the popular camera system used with vessel hollowing tools.
__________________________

Monthly club meeting - May 16, 2016.

If the City approves the removal of the elm trees across the street from the old train
depot, the club agreed to do the removal process in order to have access to the wood.
Discussions were held on additional meetings each month on basic training and segmented turning.

Butch Lindsey from Tuttle presented a class on wood characteristics and the basic turning tools
of the roughing gouge, parting tool, spindle gouge, skew, and scraper.  He also demonstrated
how to turn a picture or rough sketch of a spindle into a more detailed drawing with dimensions.
__________________________

Monthly club meeting - April 18, 2016.
Show and Tell